Argo Conquest Manuel d'utilisateur télécharger pdf (Page 29)

Engine System Argo Service Manual

Ontario Drive & Gear Limited www.odg.com

PH. (519)- 662-2840 FAX (519)- 662-2421

Lifting the Engine From the Vehicle

This procedure requires the use of an overhead hoist. Do NOT attempt to lift out by

hand. Ensure all components attached to the engine have been detached. Lift out

slowly and carefully. If you wish to remove the muffler from the engine before

raising it out, you may do so as an optional procedure. You may find it easier to

maneuver the engine up and out with the muffler removed, but it is not necessary.

Ensure all hoist chains or belts are secure, and hooks are locked into place. Keep all

fingers and hands clear of the area from which the engine is being lifted.

14. Attach the overhead hoist to the engine. There is a hook provided on the engine

Photo 18, (located near the yellow oil fill plug on earlier spec. engines and beside

the rear cylinder head cover on later spec. engines),for connecting one side of the

hoist chain. Connect the other side to the rad bracket. Photo 19

18 19

15. Slowly and gently raise the engine through the hood area. Some manuevering is

required as the engine does not necessarily come straight up and out. Avoid damage

to any other components as well as the upper body. Photo 20 & 21

20 21

EN-23A

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Pas de commentaire

Argo Conquest Manuel d'utilisateur Page 29