Argo Conquest Manuel d'utilisateur télécharger pdf (Page 11)

Argo Service Manual Engine System

Ontario Drive & Gear Limited. www.odg.com

PH. (519)- 662-2840 FAX (519)- 662-2421

EN-11

12. Disconnect the fuel line at the carburetor. Photo EN-9

13. Disconnect the choke at the dash.

EN-9 EN-10

On Conquests manufactured prior to CB14606, remove the molded panel nut at the dash

and slip the assembly back through the body into the engine compartment.

14. Perform the servicing procedure, Removing the Muffler and Shroud (Conquest),

steps 1-6 on page DE-3 (models prior to C19672) or steps 1-2 on page DE-7 (mod-

els from C19672).

15. Disconnect the intake hose at the brake cooling duct. Photo EN-11

16. Remove the front pivot mounting bolt securing the power pack frame to the lower

main frame. Photo EN-12

Conquests manufactured from CB14606, require that the choke be disconnected at the

throttle/choke control panel. Photo EN-10 The choke knob is molded to the end of the

cable and does not thread off.

IMPORTANT

Before proceeding any further, be sure to cover the mouth of the carburetor with a

rag, or other option. This will prevent anything from entering the carburetor

unintentionally.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

Pas de commentaire

Argo Conquest Manuel d'utilisateur Page 11